page 1 of 3 models ? compact 3w converter in dip package ? i/o-isolation 1500 vdc ? fully regulated outputs ? wide 2 : 1 input voltage range ? operating temperature range -40c to +80c ? short circuit protection ? 3-year product warranty the tdl 3 series with 2:1 input voltage range is a selection of 3 watt regulated dc/dc-converters. they come in a very compact dip package (0.55 x 0.55 x 0.31 inch). order code input voltage output voltage output current max. effciency typ. tdl 3-0510 3.3 vdc 600 ma 79 % tdl 3-0511 5.0 vdc 600 ma 81 % tdl 3-0512 12 vdc 250 ma 85 % tdl 3-0513 4.5 C 10 vdc 15 vdc 200 ma 85 % tdl 3-0521 (5 vdc nominal) 5.0 vdc 300 ma 82 % tdl 3-0522 12 vdc 125 ma 84 % tdl 3-0523 15 vdc 100 ma 85 % tdl 3-1210 3.3 vdc 600 ma 80 % tdl 3-1211 5.0 vdc 600 ma 83 % tdl 3-1212 12 vdc 250 ma 87 % tdl 3-1213 9 C 18 vdc 15 vdc 200 ma 87 % tdl 3-1221 (12 vdc nominal) 5.0 vdc 300 ma 84 % tdl 3-1222 12 vdc 125 ma 86 % tdl 3-1223 15 vdc 100 ma 87 % tdl 3-2410 3.3 vdc 600 ma 80 % tdl 3-2411 5.0 vdc 600 ma 83 % tdl 3-2412 12 vdc 250 ma 87 % tdl 3-2413 18 C 36 vdc 15 vdc 200 ma 87 % tdl 3-2421 (24 vdc nominal) 5.0 vdc 300 ma 84 % tdl 3-2422 12 vdc 125 ma 86 % tdl 3-2423 15 vdc 100 ma 87 % tdl 3-4810 3.3 vdc 600 ma 79 % tdl 3-4811 5.0 vdc 600 ma 82 % tdl 3-4812 12 vdc 250 ma 86 % tdl 3-4813 36 C 75 vdc 15 vdc 200 ma 86 % tdl 3-4821 (48 vdc nominal) 5.0 vdc 300 ma 82 % tdl 3-4822 12 vdc 125 ma 85 % tdl 3-4823 15 vdc 100 ma 85 % models http://www.tracopower.com dc/dc converter tdl 3 series, 3 watt
page 2 of 3 input specifications input current no load 5 vin models: 45 ma typ. 12 vin models: 27 ma typ. 24 vin models: 16 ma typ. 48 vin models: 10 ma typ. surge voltage (1 sec. max.) 5 vin models: 12 v max. 12 vin models: 25 v max. 24 vin models: 50 v max. 48 vin models: 100 v max. start-up voltage 5 vin models: 4.5 vdc max. 12 vin models: 9.0 vdc max. 24 vin models: 18 vdc max. 48 vin models: 36 vdc max. input filter internal capacitor conducted noise en 55022 class a or b (with ext. components) esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3, 10 v/m, perf. criteria a fast transient / surge (with external input capacitor) en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 1 kv perf. criteria a Cexternal input capacitor all models: nippon chemi-con ky 220f/100v conducted immunity en 61000-4-6, 10 vrms, perf. criteria a magnetic field immunity en 61000-4-8, 3 a/m, perf. criteria a output specifications voltage set accuracy 1.5 % max. voltage balance (dual output models) 2 % max. regulation C input variation 0.2 % max. C load variation 0 C 100 % 1 % max. dual output: 2 % max. (balanced load) cross regulation - dual output: 5 % max. (asymmetrical load 25 % / 100 %) minimum load no minimum load required ripple and noise (20 mhz bandwidth) 70 mvp-p typ. transient response C recovery time ( 25% load step change) 500 s max. C response deviation ( 25% load step change) 5 % max. short circuit protection continuous, automatic recovery over load protection at 170 % of iout nom. (foldback) capacitive load Csingle output all models: 100 f max. Cdual output all models: 100 f max. (each output) general specifications temperature ranges C operating (convection cooling 20lfm, 0,1m/s) C40c to +70c (without derating) C case temperature +95c max. C storage temperature C50c to +125c derating 4.0 %/k above 70c humidity (non condensing) 95 % rel h max. isolation voltage C i/o isolation voltage (60 sec.) 1500 vdc isolation capacitance (input/output) 100 pf typ. isolation resistance (input/output) >1 gohm altitude during operation 5000 m temperature coefficient 0.02 %/k max. tdl 3 series, 3 watt http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
www .tracopowe r. com ? copyright 2017 traco electronic ag sp ec i?cati ons can be changed wi thout noti ce! page 3 of 3 general specifications (continued) eiiit ccuted ( t ound enin) itcin euenc in et tndd etiiction docuent tcooecooeietd nionent coince ec www.tracopower.com/products/reach-declaration.pdf o o directie // physical specifications casing material non-conducting lack plastic ( ted) ottin tei iicone ( ted) in tei tinned coe ce eit ( o) odein teetue ec outline dimensions pin single dual 1 Cvin gd Cvin gd 4 +vin vcc +vin vcc 5 +vout +vout 6 no pin common 7 Cvout Cvout pin-out dimensions in [mm], () = inch tolerances: x.x 0.5 (0.02) x.xx 0.25(0.01) pin dimension tolerance 0.05 (0.002) 3.1 (0.12) 7.75 (0.30) 8.0 (0.31) 0.5 (0.02) 14.0 (0.55) 7.62 (0.30) 3 x 2.54 (3 x 0.10) bottom view 1 4 5 6 7 14.0 (0.55) 7.62 (0.30) 3.19 (0.13) 3.19 (0.13) tdl 3 series, 3 watt rev. march 06. 2017
|