the WTC-100? wind tunnel controller is a device to control the air velocity in a chamber- like wind tunnel or card rack. the WTC-100? helps automate thermal characterization of heat sinks, boards and components in a wind tunnel or card rack testing for different fan tray confgurations. it has two independent sensors for determining air temperature and velocity to facilitate rapid feedback of the airfow inside the test chamber. the controller communicates with a pc through a usb port, enabling the user to fully automate air fow testing. uni-sensor based control and measurement enables the user to control the air fow anywhere inside the test chamber . the fow range, step increment and the dwell time are set from the stagecontrol? application software by the user. for further technical information, please contact advanced thermal solutions, inc. at 1-781-769-2800 or www.qats.com 89-27 access road, norwood, ma 02062 usa | t: 781.769. 2800 f: 781.769.9979 | www.qats.com r3_0215 wind tunnel controller features: ? automatic controller fully automatic controller for components, heat sinks, and card rack characterization ? independent sensors two independent sensors for measuring air temperature and velocity simultaneously ? highly accurate feed back control to maintain air velocity in the test domain +/- 0.5% of the set velocity ? wide velocity range control velocities from 60 to 10,000 ft/min depending on the system fan tray ? temperature range measures temperatures from -10c to 120c ? easy flow setup enables ramping of flow from a set minimum to a set maximum at specified points. sets dwell time at each measurement point. ? stagecontrol tm software user friendly labview tm based application software creates easy data viewing and logging ? time-efficient WTC-100 tm saves testing time by facilitating automatic air flow control and measurement. ? free lifetime tech support WTC-100 tm wind tunnel controller dimensions (l x w x h) 350 mm x 264 mm x 114.6 mm (13.8 x 10.4 x 4.5) power 115 vac input power velocity range 0.2 to 50 m/s (60 to 10,000 ft/min) temperature range -10c to 120c software stage control tm connection type usb port stagecontrol tm rear view
|