technical data sheet rpc-7 open circuit 07P12L-000S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 457-2 documents application note an001 calibration services material and plating connector parts material plating center conductor ps outer conductor cube gold, min. 1.27 m, over nicke l body stainless steel passivated coupling nut stainless steel passivated dielectric ps
technical data sheet rpc-7 open circuit 07P12L-000S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data frequency range dc to 18 ghz return loss 0.10 db, dc to 4 ghz 0.15 db, 4 ghz to 18 ghz error from nominal phase 1 1.2, dc to 4 ghz 2.5, 4 ghz to 18 ghz 1 the nominal phase is defined by the offset delay, the offset loss and the fringing capacitances. mechanical data mating cycles 3 5000 maximum torque 1.95 nm recommended torque 1.36 nm gauge 0.00 mm to 0.025 mm general standard definitions for proper operation the vector network analyzer (v na) needs a model describing the electrical behavio ur of this calibration standard. the different models, units, and terms used will depend on the vna type and they will have to be entered into the vna. all values ar e based on typical geometry and plating. offset z o / impedance / z o 50 w offset delay 0.0000 ps length (electrical) / offset length 0.000 mm offset loss 0.00 g ? /s loss 0.0000 db/ ghz fringing capacitances 2 2 fringing capacitances are determined individually for each open circuit and are documented in a calib ration certificate. environmental data operating temperature range 3 + 20 c to +26 c rated temperature range of use 4 0 c to +50 c storage temperature range - 40 c to +85 c rohs compliant 3 temperature range over which these specification ar e valid. 4 this range is underneath and above the operating te mperature range, within the open circuit is fully f unctional and could be used without damage.
technical data sheet rpc-7 open circuit 07P12L-000S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 3 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg declaration of calibration options factory calibration standard delivery for this calibration standard inc ludes a factory calibration. the calibration certif icate issued reports individual calibration results, traceable t o national / international standards. model based s tandard definitions are individually optimized and reported in an agilent/keysight, rohde & schwarz and anrits u compatible vna format. accredited calibration not available. for further, more detailed information see applicat ion note an001 on the rosenberger homepage. calibration interval recommendation 12 months packing standard 1 pce in box weight 56.3 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 12.08.04 lars ramtke 31.05.16 d00 16-0601 marion striegler 31.05.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representatio n or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
